Good resistance to chemical media
Can be used in aggressive environments
Durability: Good corrosion and weather resistance
Easy handling and processing
available in many versions
Also available in other colors with corresponding order quantities
Low assembly and transportation costs
Heat and cold resistant
No sparking
| Minimum distance | e | c | P1 | P2 |
| Load in longitudinal direction of the profile | 2.5 ds | 2 ds | 4 ds | 4 ds |
| Force perpendicular to the direction of pultrusion | 2.5 ds | 2 ds | 4 ds | 4 ds |
ds = screw diameter
dL = hole diameter
| Ring/screw | M8 | M10 | M12 | M16 | M20 |
| ds (mm) | 8 | 10 | 12 | 16 | 20 |
| Outer diameter of the washer | The washers must have a particularly large diameter of at least 3.4x ds. | ||||
| MA (Nm) | 16,8 | 33,2 | 59 | 141,2 | 275,3 |
| FV (kN) | 11,1 | 17,48 | 26,24 | 47,07 | 73,42 |
| Outer diameter of the washer | Washers with a diameter of at least 3.0 x dS should be used for screw connections that are only used to secure the position. | ||||
| MA (Nm) | 5,73 | 11,6 | 20,9 | 50,7 | 98,6 |
| FV (kN) | 3,78 | 6,09 | 9,28 | 16,91 | 26,3 |
The following hole clearance must be maintained between the screw diameter and the hole diameter:
| M8 to M16 screws: | dL – ds ≤ 1.00 mm |
| M20 screws: | dL – ds ≤ 2.00 mm |
You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information